Door suction is a common product in door and window hardware that helps control the closing speed of the door and prevents the door or window from closing suddenly or slamming due to wind or other external forces. There are several steps to follow when installing door suckers:      Initial stepIt is to determine how and where the door sucker will be mounted. Depending on individual needs and aesthetic considerations, you can choose to mount the door sucker on the wall or on the floor. If you choose wall mounting, you also need to determine the exact mounting location for subsequent drilling and installation.

      Second step, the door sucker needs to be tested. Open the door to the great position and observe if the door sucker is at the right distance on the door and check if the angle of the door sucker is as expected. If there are any adjustments that need to be made, you can adjust them accordingly.

      Third step, make positioning marks on the floor or wall to determine the exact location of the door stop. For floor installations, you will need to mark the floor tiles and ensure that the door stops are in the exact position.

      Fourth step, after locating the door suction, the fixed end needs to be fitted. This usually involves drilling holes in the door body, then inserting expansion bolts and screws into the holes, followed by fitting the suction base cover and suction seat, and finally tightening the screws using an Allen tool.

      Fifth stepIt is the installation of the suction seat. The upper part of the door suction is mounted on the door, usually by screwing the suction seat to the bottom cover of the suction seat of the door body.

      Sixth step, make fine adjustments. It may be necessary to fine-tune the angle of the door suction so that it fits snugly into the suction seat at the door end and tighten the screws thoroughly.

      Seventh step, carry out inspection and maintenance. After the installation is completed, all parts should be checked for stability and necessary maintenance should be carried out, such as regular cleaning of dust and dirt, to ensure the normal operation and service life of the door suction.

      The process of installing door suckers needs to be done carefully to ensure accuracy and solidity at every step. By installing door suckers correctly, you can improve the experience of using your windows and doors and increase their security and durability.